Page 1 of 1
Wheel balancing
Posted: Tue Jun 22, 2021 9:29 pm
by Widdup
These are good and look better than stick on weights. I think you have to copy and paste to view.
https://www.ebay.co.uk/itm/Motorcycle-S ... 890.l49286
Re: Wheel balancing
Posted: Tue Jun 22, 2021 9:31 pm
by Widdup
No you don’t.
Re: Wheel balancing
Posted: Wed Jun 23, 2021 12:10 am
by frederick
For a more "period correct" look I used an old dirt track racer trick using heavy solder.
I had the mounted wheels balanced and the rim marked with the weight and position required.
Measured out the appropriate weight solder and wrapped the spokes, splitting the solder proportionally if the spot was mid spoke. They’re not going anywhere...besides centrifugal force, each is locked into position with a tiny dab of superglue.