Page 3 of 3

Re: Build progress

Posted: Fri Aug 16, 2019 1:10 pm
by westendguzzi
Looks good from here. Hope you've recorded all the relays and fuses on your wiring diagram, not that she's going to break down!
Will the relays on the glovebox be under the body shell?
What is the clear plastic bottle for?
Good pictures that can be zoomed in, thank you.

Re: Build progress

Posted: Fri Aug 16, 2019 3:19 pm
by Tamos
Hi, yes the relays on the glove box will be covered by body but should be able to remove them, if necessary, by taking off Ecu first. Won’t be easy but hopefully will not need to replace. Have noted what all the fuses and relays are for - didn’t do it when I built JZR and caused a few problems. The clear plastic bottle is the breather/oil expansion for the reverse gearbox, seemed a suitable place to put it.
Cheers, Tony

Re: Build progress

Posted: Fri Aug 16, 2019 3:55 pm
by westendguzzi
Bit overkill with the bottle, bearing in mind the reverse box only has about 250ml of oil in it.
I glued a pill bottle to the petrol tank, pipe was a push fit in hole hopefully keeping dirt out, going to bottom, sucking any oil back when it cools. Probably been better under the bonnet! I've never looked in it to see if there is any oil there.