side bolster
Posted: Wed Oct 27, 2021 5:27 pm
Ok so the type 3 was a bit "comfortable", and the type 4 leaves me sliding from side to side when cornering.
This is my second attempt at resolving it - My first was to put on weight!!! (although it worked to some degree I am probably around 5 stone short of what I need to be).
Attempt 2 certainly works and fortunately I have enough cow left to finish it in leather.
The question however, is how to secure it so it looks right. The fibreglass side panel is shaped and i dont really want to be drilling it.
Suggestions would be appreciated.
If you have already done something similar it may save me a lot of hassle
This is my second attempt at resolving it - My first was to put on weight!!! (although it worked to some degree I am probably around 5 stone short of what I need to be).
Attempt 2 certainly works and fortunately I have enough cow left to finish it in leather.
The question however, is how to secure it so it looks right. The fibreglass side panel is shaped and i dont really want to be drilling it.
Suggestions would be appreciated.
If you have already done something similar it may save me a lot of hassle