New Tail Section for Type 3

Post Reply
peakrock
Posts: 30
Joined: Thu Sep 27, 2018 4:52 pm
Location: Wreningham

New Tail Section for Type 3

Post by peakrock » Sun Aug 11, 2019 8:10 pm

Having decided to embark on my second Triking build and being inspired somewhat by Oily and what could be done to a Triking, I thought it might be interesting to mould my own tail section. I wanted something reminiscent of pre war single seat racing cars with lots of curves although I was probably a bit naive in how hard it would be to shape and then mould something with so many complex curves in!

Anyway, with the help of Alan who supplied me the first 6 inches of a Mk3 tail section so I could be sure the new tail section would fit onto the body I made a plug from that to the desired shape, then took a mould off it and have just produced the first (and probably only) tail section.

I've attached some photos of it in it's just moulded state and if you look closely there are some minor defects that will need filling etc but essentially it's come out OK. It was really tricky to make, particularly the flange where it meets the body, makes you appreciate the skill of the laminator Alan uses.

It will be a while yet before it's on the road but here's a preview.

Dave
Attachments
New-Tail-4-small.png
New-Tail-3-small.png
New-Tail-2-small.png
New-Tail-1-small.png

EricStarmer
Posts: 149
Joined: Fri Sep 28, 2018 3:51 pm
Location: USA

Re: New Tail Section for Type 3

Post by EricStarmer » Sun Aug 11, 2019 8:49 pm

Awesome job, Dave - looks great - looking forward to seeing it mounted on your Triking ! If you have any photos of the work involved leading up to the final piece being produced, I , and I'm sure others, would love to see them .
Too bad the regulations in the UK require you to have those tail light bump-outs, though :(
Eric

Richard and Pat
Posts: 279
Joined: Wed Sep 26, 2018 2:44 pm
Location: Biggleswade

Re: New Tail Section for Type 3

Post by Richard and Pat » Mon Aug 12, 2019 7:42 am

Well done Dave, you are an inspiration.

peakrock
Posts: 30
Joined: Thu Sep 27, 2018 4:52 pm
Location: Wreningham

Re: New Tail Section for Type 3

Post by peakrock » Mon Aug 12, 2019 7:43 pm

Thanks for the kind comments Eric and Richard, I do have some photos of the various stages of the tail section build, I'll put some together over the next few days with a brief explanation of what went on.

As regards the rear lights, I moulded those shapes in the tail specifically to fit in with the rear lights I've chosen to go on it. The image below shows them just resting on the tail to give you an idea (I rotated the camera image) and they will most likely have short collars/spacers so they extend a bit further backwards and will also be parallel. I'm still wrestling with the collar shapes at the moment and how long they'll be...
Attachments
Triking-tail-with-lights.png

EricStarmer
Posts: 149
Joined: Fri Sep 28, 2018 3:51 pm
Location: USA

Re: New Tail Section for Type 3

Post by EricStarmer » Mon Aug 12, 2019 10:00 pm

Looking forward to seeing the photos, Dave.
Do you have a '59 Cadillac sitting somewhere in your garage, minus tail lights ? :)
https://pepecadillac.wordpress.com/2013 ... onnection/

EricStarmer
Posts: 149
Joined: Fri Sep 28, 2018 3:51 pm
Location: USA

Re: New Tail Section for Type 3

Post by EricStarmer » Mon Aug 12, 2019 10:26 pm

Don't get too carried away, Dave, or your Triking may end up looking like this :D
https://www.youtube.com/watch?v=5nM-WEp1-Zs

Actually, I love Baron Margo's creations, and have debated buying an "English Wheel" so I could attempt to form a second body for my Triking out of shiny aluminium, looking somewhat like one of Baron Margo's (it would sound a lot better, though), for that probably non-existent day in the future when I find my Triking "boring" :)

Richard and Pat
Posts: 279
Joined: Wed Sep 26, 2018 2:44 pm
Location: Biggleswade

Re: New Tail Section for Type 3

Post by Richard and Pat » Tue Aug 13, 2019 7:20 am

I looked at those too Dave,

Inspired choice from a biased being.

ATB
Rich

Oily
Posts: 14
Joined: Mon Oct 01, 2018 6:09 pm
Location: Jersey

Re: New Tail Section for Type 3

Post by Oily » Tue Aug 13, 2019 5:39 pm

Dave, I'm flattered to have inspired you (albeit somewhat!), and very much looking forward to seeing progress and the finished car. Loving the Caddy tail lights.

There was a threat a while ago from these folk........https://www.castlethree.co.uk/
I haven't seen any further news from them, or indeed if they have actually made one, but their body styles are superb.

Post Reply