Build progress

Tamos
Posts: 50
Joined: Sat Oct 13, 2018 7:04 pm
Location: Maidstone

Re: Build progress

Post by Tamos » Wed Mar 18, 2020 9:59 am

Thanks Chris. I know you are trying to rush me so that I am not properly prepared for the race challenge against your big and heavy Triking!!
Agree that clear silicon good to stick cockpit moulding onto body, but is there a preferred contact adhesive for wrapping round and sticking vinyl trim to body?
Cheers, Tony

Weg
Posts: 807
Joined: Tue Sep 25, 2018 7:30 pm
Location: Huntingdonshire

Re: Build progress

Post by Weg » Wed Mar 18, 2020 11:55 am

I didn't stick my cockpit roll on to the body, I bolted it with captive bolts laminated to the g/f roll before upholstering.
Was certainly a boon when she went in for respray a couple of winters ago.
It's documented on the old forum somewhere, I'll look it out if there is interest.

Tamos
Posts: 50
Joined: Sat Oct 13, 2018 7:04 pm
Location: Maidstone

Re: Build progress

Post by Tamos » Thu Mar 19, 2020 10:57 am

Tony, certainly be interested to have more details re fixing cockpit trim. Did you glue the vinyl trim to the fibreglass “roll” instead of stretching down and glueing to body?
Tony

Weg
Posts: 807
Joined: Tue Sep 25, 2018 7:30 pm
Location: Huntingdonshire

Re: Build progress

Post by Weg » Thu Mar 19, 2020 1:32 pm

Yes, the leather trim was glued to the "roll". I used a D shaped foam rubber tube which I think Al supplied but is available from Woolies, plus a foam finisher for smoothness. (Under the leather)
https://www.woolies-trim.co.uk/product/ ... -extrusion
On the first car I built, I bonded nuts to the g/f and used bolts correct length from the underside.
I did have better results on the second car (Edith) using M4 bolts with a metal T welded to them, laminated in position, nuts & washers underneath. Holes needed to be drilled through both the roll and the body before upholstery, in accessible positions to get nuts on, even through the chassis rail on the low sides. Some of the bolts needed to be at an angle to enable the whole assembly to be fed into final position. When drilling through gel coat finish, don't forget to put a negative rake on the drill bit to prevent damage.
This did mean that I could fit the trim and drive around for a lengthy shakedown (1500mls) before paint job.
Hope this helps. 8-)
(Couldn't find any pics of the bolt method)
Attachments
IMG_0003a.jpg
IMG_1002aa.jpg
IMG_0995a.jpg
IMG_0002a.jpg

User avatar
Throwley
Posts: 108
Joined: Wed Aug 07, 2019 9:19 am
Location: Olney, Bucks

Re: Build progress

Post by Throwley » Fri Mar 20, 2020 10:25 am

I always quite liked the look of this method...

Image

Tamos
Posts: 50
Joined: Sat Oct 13, 2018 7:04 pm
Location: Maidstone

Re: Build progress

Post by Tamos » Wed Apr 08, 2020 1:41 pm

Build nearing completion. Have glued the vinyl to the f/glass cockpit roll but have not yet fixed roll to body, probably will glue in place. Took 2 days to get satisfactory result stretching vinyl over roll and minimising creases on corners, end result acceptable but not perfect.
Could not resist fitting rest of upholstery to see what it looks like, and I think it looks absolutely frigging gorgeous. The colours go together really well - thanks to Nicki for help and quality workmanship.
Just got carpets to sort out, then have to wait to book MSVA.
Attachments
2ACC7E7E-ED69-47E7-A0F2-913821223A90.jpeg
A8B09C48-4075-4FAC-9BEE-D479C18F5C43.jpeg
2B69B0F2-63B5-47A7-A28C-AE871A675749.jpeg
9264A828-C1B8-45D7-8EFB-150B7E934EA8.jpeg

Richard and Pat
Posts: 778
Joined: Wed Sep 26, 2018 2:44 pm
Location: Biggleswade

Re: Build progress

Post by Richard and Pat » Wed Apr 08, 2020 3:09 pm

Looking the Dog's biscuits Tony.
Well done.

EricStarmer
Posts: 280
Joined: Fri Sep 28, 2018 3:51 pm
Location: USA

Re: Build progress

Post by EricStarmer » Wed Apr 08, 2020 3:49 pm

Looks great, Tony - the green and tan go really well together !

Tamos
Posts: 50
Joined: Sat Oct 13, 2018 7:04 pm
Location: Maidstone

Re: Build progress

Post by Tamos » Wed Apr 08, 2020 4:55 pm

Thanks for your kind comments. Can’t wait to get it on the road once current virus problems are over. Have spent most of afternoon driving up and down my short shingle drive, getting used to reverse g/box which does seem to be bedding in as can now get forwards more easily. Have now got to go out and sweep shingle back over wheelspin marks.
Cheers, Tony

Dreamer
Posts: 22
Joined: Tue Mar 10, 2020 7:54 pm
Location: Malta

Re: Build progress

Post by Dreamer » Wed Apr 08, 2020 7:37 pm

Congrats. Very good result and a nice colour combination. When I upholstered something for my car in vinyl and got creases on the corners I removed them by using my wife's hairdryer, not heat gun. It's amazing how it stretches

Post Reply