Bonnet / Boot cover fasteners

[gogboy]

I was checking out a previous post regarding panel fasteners. So many choices but I always think simplest is best.

After much searching I came across these quick release fasteners. They look good and are quick release. Above all they are simple.

Here's a link ..... https://www.demon-tweeks.com/uk/pitking ... se-576124/

[Weg]

Brilliant long term solution for the Triking bonnet & boot.
At nearly £100 more for a set compared with my existing M6 csk screws, but well worth it bearing in mide how many times the bonnet and boot will be removed.

[Richard and Pat]

These have been fitted to the rear by Guy who organised the Buxton Rally a couple of years ago and work well apparently. As WEG says the M6 CSK stainless steel screws are a more economical solution.
I use an electric screwdriver or Allen spinner to remove my Triking covers and everyone knows how often I do that!

[Oily]

I’m using these….