Hi,
I see a lot of builders having trouble pulling the tapers of ball joints into place with the nyloc nuts (me included) . Find an ordinary nut with the same thread and the tapers pull together much easier. Just change out the nut for the nyloc when in place. You only need one ordinary nut.
Hope helps, much simpler than trying to clamp the joints.
Steve
Tech tip - ball joint fitting
-
- Posts: 782
- Joined: Wed Sep 26, 2018 2:44 pm
- Location: Biggleswade
Re: Tech tip - ball joint fitting
Useful advice, thank you.