forum2.trikingsportscars.co.uk

Sounds a great run, Tony. I've not been to the T&K for a looong time.

I'll try my hardest to get to it (workload dependent) will confirm later. Just checked the long-range weather forecast, it's looking like it may be good that week.

Not sure where you are in Beds, but just over the border in Rushden are Cover Systems. They do readymade and bespoke covers which although of a lighter material than I was expecting, work well and are durable. I think they also offer a pram hood type cover for larger bikes which may fit a Triking (a...

Have done this a couple of times on old Guzzis. It's a horrible job. Heat is your friend, as described before - do not start thwacking the bar, it doesn't end well. This is a common problem on old Guzzis, part of my maintenance schedule is to remove, clean lug holes and bar, polish and refit with pl...

From the MOT manual... You do not need to inspect windscreen wipers on vehicles with: an opening windscreen some other means of giving the driver an adequate view through the windscreen to the front, left and right From Construction and Use... Windscreen wipers and washers 34.—(1) Subject to paragra...

Is your timing set correctly, and done in the right (set gaps; time right D cyl first, move distributor to adjust; left S cyl second, move points plate to adjust) order?

DSU475 wrote: ↑

Thu Jul 07, 2022 6:02 pm

3 Wrist bands left.

The bands for those who have requested them, will be in the post tomorrow.

Thank you!

DSU475 wrote: ↑

Wed Jul 06, 2022 10:09 am

WRIST BANDS.

I have been allocated 10 wrist bands allowing free entry for driver only.
I have 7 left ... First come first served.

Andy.

If there's one left, can I have it, please?

westendguzzi wrote: ↑

Sun Jul 03, 2022 5:24 pm

Another great Day out.
4 Trikings, One parked in the field.

The far end of the field, too, amongst the ordinary Porsches and Rollers.
Won't be arriving late next time.

One alternative is to change the brake pad material. I think Allan has some different grades, but may affect braking. If you have a Convert parking brake they are rare and I do not think any pads are available. You can adjust the Convert brake by operating on allen screws in centre of pads/piston b...

I'm looking at this issue on my Type 1 at the moment. Initially, there was contact with the Convert parking brake to the disc, it was still dragging slightly after correct adjustment of the arms and cable, so I've shimmed the carrier to ensure the calipers are properly centralised on the disc. The p...