Search found 207 matches
- Tue Nov 28, 2023 1:40 pm
- Forum: General Chat
- Topic: Type 1 rebuild
- Replies: 6
- Views: 55541
Re: Type 1 rebuild
Work continues on the Type 1 although a lot of it can't really be seen as it's consisted of sorting out the wiring loom, running fuel line and brake pipes through the tunnel etc. However, the dashboard may be of interest to readers as I had to replace the old wooden one due to cracks, surface damage...
- Wed Nov 08, 2023 8:05 pm
- Forum: Type 1, 2 and 3
- Topic: The Noisy Tappet Saga
- Replies: 7
- Views: 40922
Re: The Noisy Tappet Saga
Surely you won't need to adjust the valve timing as presumably the cam is profiled to use the standard drive pulley and the ignition timing will just remain as is? Or does it need the ignition advanced/retarded? It looks like you need to check clearances between the mechanical bits but that's all is...
- Wed Nov 08, 2023 9:30 am
- Forum: Type 1, 2 and 3
- Topic: Type 1 Wiring Loom question
- Replies: 7
- Views: 38241
Re: Type 1 Wiring Loom question
Thanks Simon, I've sorted out the wiper motor connections thanks. The last remaining question is the hazard light switch connector block but I think I'll get the one used on old minis and see if that works - I can always adapt the connections if need be.
Regards Dave
Regards Dave
- Mon Nov 06, 2023 4:48 pm
- Forum: General Chat
- Topic: Triking 2023 Calendar
- Replies: 37
- Views: 154712
Re: Triking 2023 Calendar
I'm a bit confused as this is or was the 2023 calendar thread...
- Sun Oct 29, 2023 8:09 pm
- Forum: Type 1, 2 and 3
- Topic: Type 1 Wiring Loom question
- Replies: 7
- Views: 38241
Re: Type 1 Wiring Loom question
Hi Tony I meant to draw more bulb symbols instead of earth symbols - I was in too much of a rush! So the green/brown wire goes to the indicator switch which then directs it to the left or right side indicator. What I really need is to know what the hazard rocker switch connections are when the switc...
- Sat Oct 28, 2023 10:17 am
- Forum: Type 1, 2 and 3
- Topic: Type 1 Wiring Loom question
- Replies: 7
- Views: 38241
Re: Type 1 Wiring Loom question
Another question you may be able to help with please. I've nearly finished the rewiring apart from the hazard and indicator circuits. I have an eight pin connector block with 5 wires going to it. After speaking to Al we think it goes to a Hazard light rocker switch similar to that fitted on older mi...
- Tue Oct 24, 2023 4:03 pm
- Forum: General Chat
- Topic: Speed humps.
- Replies: 9
- Views: 29690
Re: Speed humps.
I've not had a problem with grounding over speed bumps with my Type 2 or Type 3, it may be that you have shorter length coil overs at the back than standard. You could measure the free length and let us know. Two possible solutions; make up some short extensions for the top coil over mounts or upgra...
- Tue Oct 10, 2023 4:17 pm
- Forum: Meetings and Events
- Topic: Triking Meet 2024 – Shropshire
- Replies: 8
- Views: 70732
Re: Triking Meet 2024 – Shropshire
Thanks for accommodating our date requirements Paul, I’ve booked the hotel room so see you there if not before..
Dave
Dave
- Fri Oct 06, 2023 6:43 pm
- Forum: General Chat
- Topic: Type 1 rebuild
- Replies: 6
- Views: 55541
Re: Type 1 rebuild
I've been spending a lot of time on the electrics. I'm reusing the loom but as it was removed and not labeled up it's been a slow process working out what goes where, sometimes the multi meter has been needed to confirm things. I've also no idea where the switches were located so that coupled with a...
- Sun Oct 01, 2023 6:43 pm
- Forum: Meetings and Events
- Topic: Triking Meet 2024 – Shropshire
- Replies: 11
- Views: 62867
Re: Triking Meet 2024 – Shropshire
Great idea! Clare and I would be interested in attending though we have a family wedding to attend on 8th June so not around then for us. But if that turns out to be your best date then go with it.
Thanks Dave
Thanks Dave