forum2.trikingsportscars.co.uk

Also - its is VERY important you fit the bearing spacer in the hub between the 2 wheel bearings, The purpose of the spacer is to allow the wheel axle to be fully tight without placing any side load on the bearings. Depending on the type of donor wheel you have it is sometimes necessary to shorten th...

Hi Kristoffer. We just press the bearings in to the hub at room temperature, If it makes it easier you can put the bearing in the freezer and heat the hub in the oven - about 20 minutes at around 150 degrees C should do it. The hub to wheel connection can be either way around - they are made with an...

A few Type 2's had the groove removed as a special order as requested by the customer. Either to gain slightly more internal space or purely for appearance.

Hi,
Triking build agent is located near Lincoln, you would be able to view Trikings' there. Its not too far from Notts.

Hi,
The T4 (which Frederick has) is bigger than the T3.
We have covers for both I could probably lay one out flat and try to measure it somehow if it helps...........

Hi, Its generally a better principle to drill the floor pan in the optimum position and minimise any pushrod extension and pedal pad extension, unless there is another contributing factor -such as rapid adjustment between 2 drivers - is required,. The std floorpan is designed to be drilled in any po...

Tony, I find it hard to believe you don,t know who Tom Petty is, And I thought you were so Rock,n,Roll.

We still have some new old stock Tee shirts, Sweat shirts and similar available from older styles no longer made (So of course if you wait long enough they will doubtless become hugely collectable and highly prized!) These are COMPLETELY FREE including UK post to any members who would like one - jus...

Easily done - wev,e all been there !! I seem to remember Dick fitted some very nice mudflaps of his own invention.....