Search found 12 matches
- Sun Feb 11, 2024 10:29 am
- Forum: Donor bikes and spares
- Topic: Type 1 Front Brake Calipers wanted
- Replies: 6
- Views: 3414
Re: Type 1 Front Brake Calipers wanted
Andover Norton will supply all the rebuild parts req for the Lockheed/AP C101 etc . Suggest the stretch bolts are also changed .
- Wed Apr 26, 2023 8:27 am
- Forum: Type 1, 2 and 3
- Topic: Brake bleeding spring maintenance
- Replies: 8
- Views: 23669
- Wed Oct 05, 2022 11:16 am
- Forum: Type 1, 2 and 3
- Topic: Air pressure sensor
- Replies: 4
- Views: 1760
Re: Air pressure sensor
I have sent a pic to your email address .
Regards
Regards
- Tue Aug 23, 2022 5:47 pm
- Forum: Type 1, 2 and 3
- Topic: Girling/Triumph front brake calipers
- Replies: 13
- Views: 3440
Re: Girling/Triumph front brake calipers
The front Master cyl. Pushrod usually finishes appx 12/15 mm longer than the rear cylinder push rod .
If you have a Drum on the rear ,you can also take some adjustment off it with the square adjuster which will help the bleeding and front to rear bias .
If you have a Drum on the rear ,you can also take some adjustment off it with the square adjuster which will help the bleeding and front to rear bias .
- Sat Aug 20, 2022 4:19 pm
- Forum: Type 1, 2 and 3
- Topic: Girling/Triumph front brake calipers
- Replies: 13
- Views: 3440
Re: Girling/Triumph front brake calipers
The early T2 uprights/Caliper mounting ears were not known for their accuracy in relation to being parallel to the Disc so worth checking as its not uncommon to have to use shims between the Caliper and mounting Ears . If not parallel,the pads will have a long way to move and not be using the full w...
- Sat Jun 18, 2022 3:28 pm
- Forum: Type 1, 2 and 3
- Topic: Type 3 Speedo
- Replies: 9
- Views: 3696
Re: Type 3 Speedo
M8 Speed Sensor M8 Speed Sensor Brand: ETB Product Code: 340-002 Availability: In Stock Price: £32.00 Inc. VAT: £38.40 Qty: DescriptionRelated Products (10) ETB hall-effect Speed Sensor for programmable electronic speedometers (both ETB & VDO). This is sensor is 8mm diameter (M8 thread) and 30mm lon...
- Fri Jun 17, 2022 11:18 am
- Forum: Type 1, 2 and 3
- Topic: Type 3 Speedo
- Replies: 9
- Views: 3696
Re: Type 3 Speedo
This is on ETB instruments site in technical information .
- Sun Jun 05, 2022 8:02 am
- Forum: Type 1, 2 and 3
- Topic: Brake Pad Replacement Time.
- Replies: 7
- Views: 3763
Re: Brake Pad Replacement Time.
Try U tube .
Fitting a Brake pedal Bia Bar.
Fitting a Brake pedal Bia Bar.
- Fri Jun 03, 2022 7:55 am
- Forum: Type 1, 2 and 3
- Topic: Brake Pad Replacement Time.
- Replies: 7
- Views: 3763
Re: Brake Pad Replacement Time.
It’s the position of the Bias bar/fulcrum point that changes which should not move the push rod angles on the Master cylinders . Ie , The push rods will remain at the same angles as preset at build up and the actuating point bearing on the push rod Clevis will move either towards the front or rear m...
- Tue May 17, 2022 6:28 am
- Forum: Type 1, 2 and 3
- Topic: Brake Pad Replacement Time.
- Replies: 7
- Views: 3763
Re: Brake Pad Replacement Time.
Have you considered adjusting the Brake bias bar for more front Brake as it appears that most of the braking force is at the rear . 70/30 ratio [Front to rear] would be the usual setting . Looking at the ridge on the front pads i would think that the pads were touching each other and not working cor...