Search found 806 matches

by Weg
Fri Mar 15, 2024 9:45 am
Forum: General Chat
Topic: New Triking members
Replies: 1
Views: 107

New Triking members

Warm welcome to Phil in Norwich and Robster in North Yorkshire.
Enjoy the fun.
by Weg
Tue Mar 05, 2024 3:34 pm
Forum: Type 1, 2 and 3
Topic: Anti Roll bar
Replies: 9
Views: 66064

Re: Anti Roll bar

Pictures from Henk.
by Weg
Fri Mar 01, 2024 9:18 am
Forum: General Chat
Topic: St David's Day
Replies: 1
Views: 209

St David's Day

Apology to any Welsh Triking owners out there, I omitted to mention this event on the 2024 Triking Calendar.

The March picture is where Dick & Myra first set up home. Quite stunning for a young couple.
R French_50428161a (1).jpg
Not in Wales ---- beautiful Somerset.
by Weg
Thu Feb 29, 2024 9:50 am
Forum: Type 1, 2 and 3
Topic: Caster
Replies: 1
Views: 148

Re: Caster

Hi Andy The castor angle is leaning back. A setting of 5-6deg is about ideal, over that figure may make the car less stable at speed. Chassis being lower on one side may be spring tension setting on shockers, also check that they are both the same length when extended. :shock: Put a search in on her...
by Weg
Wed Jan 31, 2024 9:53 am
Forum: Type 1, 2 and 3
Topic: Jacking points?
Replies: 1
Views: 634

Re: Jacking points?

Nothing wrong with jacking/supporting the car on the rear cross rail. Best use a piece of softwood on the jack or stand to minimise slipping and paint damage. At the bare metal stage, I welded on a piece of 20x20 to the rear of the chassis to enable safe lifting without slipping using the farm high ...
by Weg
Sun Jan 28, 2024 7:33 pm
Forum: Type 1, 2 and 3
Topic: Dashboard Complete (well almost)
Replies: 4
Views: 1405

Re: Dashboard Complete (well almost)

Bob, No need to compress phots this small, if you aim for 4-500kb, we will then be able to click on them to open up to give much clearer detail. Thanks for posting on here.
by Weg
Fri Jan 26, 2024 10:01 pm
Forum: Type 1, 2 and 3
Topic: Reverse light switch
Replies: 2
Views: 644

Reverse light switch

If you are going to have a reversing light then a switch on the gearbox is best plan. Reversing light must also have a warning light on the dash. It's not practical to mount the switch on the chassis as there is too much flexibility to give a positive action. Once adjusted, has proved very reliable....
by Weg
Thu Jan 25, 2024 8:51 pm
Forum: Type 1, 2 and 3
Topic: Oils etc
Replies: 6
Views: 1429

Re: Oils etc

Great to hear of progress Andy.
EP90 is fine for gearbox and diff, 1lt is enough for both.
A good quality multigrade will be fine in the Jackal engine. Change every 1500 and filter every other change.
Do change the filter now though. Sorry, sump off.
No experience of click 50.
Tony
by Weg
Thu Jan 18, 2024 10:32 am
Forum: Type 1, 2 and 3
Topic: Front wheel removal
Replies: 5
Views: 1326

Re: Front wheel removal

My seat base is 550mm long so oversails the chassis rail, 2" riser tucks in behind the rail keeping the seat in position. Much better support for the legs giving superior creature comfort on long runs.
Hence space for tools.
DSC01313a.jpg
by Weg
Wed Jan 17, 2024 9:34 pm
Forum: Type 1, 2 and 3
Topic: Front wheel removal
Replies: 5
Views: 1326

Re: Front wheel removal

A piece of wood a couple of inches thick screwed to the front edge of the seat raises it up to give a lot better comfort. Space underneath for a tapered tool tray. Pics and dims to follow soon. Watch this space.