forum2.trikingsportscars.co.uk

Thanks all for the good suggestions . I like the idea with the spacer , I will persue this construction . The front brakes were blocked and the pedal was solid, it was pulled free because the yoke got stuck in the channel of the pedal. After freeing the brakes worked fine, the thing I noticed that t...

Hi all, Can any one give any advise on securing the balance bar from changing when set. I was enjoying a good ride when my Triking lost speed because of front brake locking. On inspection I noticed that the balance bar moved almost to the left (I have a type 3 LHD). The brake felt rock hard and the ...

Judging the space between Outer rim of the disc and the bridge of the caliper(I estimate it is 1 inch) the caliper is mounted to low on the mounting plate. Therefore the brake pads did not touch the disc on the outer rim. I would move the mounting holes to the correct distance so the pads fit correc...

Hi all, Here an update about the problems I have with the irregular running. After checking the carburetors the Triking did start and run beautifully for about 10 km. I stopped for a while and again the Triking would not start and after getting a bit desperate it jumped only half to life, like runni...

Thanks I have a look

Hi Guzzi owners, Can any one advise on what could be wrong with the 964ccm california3 engine. The problem is that the cold start is good but it sounds like it is running on one cylinder, then it runs okay when warm but still popping in the exhaust. Yesterday I had a new issue the engine was still w...

Great job Tony,
It is so inspiring, maybe it could be an option for Alan.
Although it is fun to make it yourself

I have us registered, realy looking forward to the meeting.
Henk

We wish you all a happy and Triking good year.
Greetings Henk

Hello Triking owners, I have made my engine breather myself, from Stainless steel pipe. It throws out a minor amount of engine oil, mainly o few drips after a long tour(200 km+/120 miles) Some leaked on the engine which leaves a filthy oil stains, and on the car trailers floor. Now I have changed th...